Fingerprint Lock & Touch Screen Instructions
Instructions for ZOSS watch winders and safes fitted with a fingerprint lock and LCD touch screen: registering and deleting fingerprints, unlocking, battery and charging indicators, and the touch screen settings.
1. Register a new fingerprint
- Short-press the SET button to register a new fingerprint. The green indicator light stays on for 5 seconds.
- Within those 5 seconds, place your finger on the sensor 5 times. The green light flickers each time to show the reading was successful.
2. Unlock
Press the sensor. If the green light flashes twice, your registration was successful and the lock opens. If the red light flashes twice, the registration failed and you should try again.
3. Reset and delete fingerprints
To reset and delete all fingerprints, press and hold the SET button for more than 3 seconds. If the green light flashes 3 times, all fingerprints have been deleted.
4. Fingerprint capacity
The fingerprint lock stores a maximum of five different fingerprints. The red light flashes three times when the limit is reached.
5. Low battery warning
When you touch the sensor, if the red light flashes three times, battery power is low.
6. Charge indicator
While charging, the red indicator light flashes quickly. Once the green indicator light becomes solid, charging is complete. Please charge the battery fully (more than one hour) before first use. Use the supplied 5V 2A adapter.
LCD touch screen settings
- Rotator setting: each Line number controls the rotator with the same number (Line 1 to Line 24 for Rotator 1 to Rotator 24), so each rotator can work individually. When a rotator is working, its number is underlined.
- Time setting: set the hour, minutes, AM/PM and T1. T1 is the time the rotator starts to work.
- TPD setting: 650, 750, 850, 1000 or 1950 TPD.
- Direction setting: choose the winding direction.
- Light setting: controls the interior light.
Not sure which TPD or direction your watch needs? Use the Watch Winder TPD & Direction Finder.